International Journal
Hyung Jin Kim, Byeong Hee Kim, and Young Ho Seo. “Immunoreaction-based Microfluidic Diagnostic Device for the Detection of Prostate-Specific Antigen.” BioChip Journal 12.2 (2018): 154-162.
Yong Min Park, Woong Ki Jang, Tae Whan Shin, Byeong Hee Kim and Young Ho Seo, Y. H. “A technique for a nano-textured gapless microlens array using self-formation characteristics of anodic alumina.” Nanoscale (2018).
Hyung Jin Kim, Young Ho Seo, and Byeong Hee Kim. “Non-Contact Intraocular Pressure Measurement Method using Relation between Deformed Cornea and Reflected Pneumatic Pressure.” International Journal of Precision Engineering and Manufacturing 19.5 (2018): 737-744.
Eui Don Han, Byeong Hee Kim, and Young Ho Seo. “Effect of Nanochannel Size of Surface Treated Thru-Hole Alumina Membrane in Rejection of Polar Molecules.” International Journal of Precision Engineering and Manufacturing 19.2 (2018): 287-292.
Hyung Jin Kim, Young Ho Seo, and Byeong Hee Kim. “New intraocular pressure measurement method using reflected pneumatic pressure from cornea deformed by air puff of ring-type nozzle.” PloS one 12.12 (2017): e0186738.
Eui Don Han, Byeong Hee Kim, and Young Ho Seo. “Effect of Nanochannel Size of Surface Treated Thru-Hole Alumina Membrane in Rejection of Polar Molecules.” International Journal of Precision Engineering and Manufacturing 19.2 (2018): 287-292.
Eui Don Han, Byeong Hee Kim, and Young Ho Seo. “Anti-cell adhesion characteristics of nanotextured surface for implantable biomedical device.” International Journal of Precision Engineering and Manufacturing 18.2 (2017): 239-244.
Hyung Jin Kim, Chang Sik Jang, Byeong Hee Kim, and Young Ho Seo. “Self-formation of microporous polysulfone hollow fiber using a single nozzle spinneret and reduction of phase-inversion speed.” Japanese Journal of Applied Physics 55.6S1 (2016): 06GH06.
Hyung Jin Kim, Byeong Hee Kim, and Young Ho Seo. “Advancing liquid front shape control in capillary filling of microchannel via arrangement of microposts for microfluidic biomedical sensors.” International Journal of Precision Engineering and Manufacturing 17.1 (2016): 59-63.
Yong Min Park, Byeong Hee Kim, and Young Ho Seo. “One-step fabrication of nanostructure-covered microstructures using selective aluminum anodization based on non-uniform electric field.” Japanese Journal of Applied Physics 55.6S1 (2016): 06GH04.
Woong Ki Jang, jong Phil Choi, Young Ho Seo, and Byeong Hee Kim. “Effect of cathode flow field configuration on air-breathing proton exchange membrane fuel cell.” International Journal of Precision Engineering and Manufacturing 16.6 (2015): 1129-1134.
Myeong Kang, Yong Min Park, Byeong Hee Kim, and Young Ho Seo. “Micro-and nanoscale surface texturing effects on surface friction.” Applied Surface Science 345 (2015): 344-348.
Hong yun So, Young Ho Seo, and Albert P. Pisano. “Refillable and magnetically actuated drug delivery system using pear-shaped viscoelastic membrane.” Biomicrofluidics 8.4 (2014): 044119.
Hongyun So, Kunwoo Lee, Young Ho Seo, Niren Murthy, and Albert P. Pisano, et al. “Hierarchical silicon nanospikes membrane for rapid and high-throughput mechanical cell lysis.” ACS applied materials & interfaces 6.10 (2014): 6993-6997.
Young Ho Seo, Hyung Jin Kim, Woong Ki Jang, Byeong Hee Kim. “Development of active breathing micro PEM fuel cell.” International Journal of Precision Engineering and Manufacturing-Green Technology 1.2 (2014): 101-106.
Hong yun So, Albert P. Pisano, and Young Ho Seo. “Caterpillar locomotion-inspired valveless pneumatic micropump using a single teardrop-shaped elastomeric membrane.” Lab on a Chip 14.13 (2014): 2240-2248.
Hyung Jin Kim, Jin Kug Son, Young Ho Seo, Won Hee Lee, Ki Tae Park, Kieth Bong Nahm, Eui Yul Choi. “Disposable microfluidic blood cuvette for measuring hemoglobin concentration.” Microsystem technologies 20.3 (2014): 499-504.
In Kyum Park, Young Ho Seo, Nam Pyo Hong. “Wire tension method for coefficient of friction measurement of micro bearing.” International journal of precision engineering and manufacturing 15.2 (2014): 267-273.
Yong Min Park, Byeong Hee Kim, and Young Ho Seo. “Three-dimensional antireflective hemispherical lens covered by nanoholes for enhancement of light transmission.” Applied Physics Express 6.11 (2013): 115202.
Young Ho Seo, Byeong-Hee Kim, and Doo-Sun Choi. “Piezoelectric micro power harvester using flow-induced vibration for intrastructure health monitoring applications.” Microsystem Technologies 21.1 (2015): 169-172.
Yong Min Park, Byeong Hee Kim, and Young Ho Seo. “Dual-side nanostructured surface for enhancement of broadband light transmission.” Micro & Nano Letters 8.8 (2013): 460-464.
“Passive contact guidance of fibroblast cells using consecutive trapezoidal micropatterns.” Applied Physics Letters 102.13 (2013): 133701.
Sang-Hee Yoon, Young Kyun Kim, Eui Don Han, Young-Ho Seo, Byeong Hee Kim, and Mohammad R. K. Mofrad. “Passive control of cell locomotion using micropatterns: the effect of micropattern geometry on the migratory behavior of adherent cells.” Lab on a Chip 12.13 (2012): 2391-2402.
Chan Jin Park, Hye Jin Lee, and Nak Kyu Lee. “Development of audio frequency vibration microforming system.” International Journal of Precision Engineering and Manufacturing 13.5 (2012): 789-794.
Kyoung Hwan Kim, Byeong Hee Kim, and Young Ho Seo. “A noncontact intraocular pressure measurement device using a micro reflected air pressure sensor for the prediagnosis of glaucoma.” Journal of Micromechanics and Microengineering 22.3 (2012): 035022.
Yong MinPark, Myeong Gang, Young HoSeo, and Byeong Hee Kim. “Artificial petal surface based on hierarchical micro-and nanostructures.” Thin Solid Films 520.1 (2011): 362-367.
Kwang Soo Kim, Young Ho Seo, Byeong Hee Kim. “Design and fabrication of synthetic air-jet micropump.” International Journal of Precision Engineering and Manufacturing 12.2 (2011): 355-360.
“Stand-alone micro direct borohydride fuel cells using mixture of sodium borohydride and potassium hydroxide.” Journal of mechanical science and technology 25.4 (2011): 931.
Yong Min Park, Hong Gue Shin, Myung Kang, Hee Chul Yang, Nam Pyo Hong, Young Ho Seo, and Byeong Hee Kim. “Fabrication of hemispherical nanopatterns on 3D microsurface.” Materials Research Innovations 15.sup1 (2011): s347-s351.
Hong Gue Shin, Yong Min Park, Byeong Hee Kim, and Young Ho Seo. “Fabrication of Hemispherical Nano Structure on a Curved Al Surface Using Low-Temperature and High-Voltage Anodizing Method.” Journal of nanoscience and nanotechnology 11.1 (2011): 427-431.
Sang-Hee Yoon, Vimalier Reyes-Ortiz, Kwang-Ho Kim, Young Ho Seo, and Mohammad R. K. Mofrad. “Analysis of circular PDMS microballoons with ultralarge deflection for MEMS design.” Journal of Microelectromechanical Systems 19.4 (2010): 854-864.
Young Ho Seo, and Byeong Hee Kim. “A self-resonant micro flow velocity sensor based on a resonant frequency shift by flow-induced vibration.” Journal of Micromechanics and Microengineering 20.7 (2010): 075024.
Y.E. Yoo, T.H. Kim, D.S. Choi, S.M. Hyun, H.J. Lee, K.H. Lee, S.K. Kim, B.H. Kim, Y.H. Seo, H.G. Lee, J.S. Lee “Injection molding of a nanostructured plate and measurement of its surface properties.” Current Applied Physics 9.2 (2009): e12-e18.
Kwon, J. T., Shin, H. G., Seo, Y. H., Kim, B. H., Lee, H. G., & Lee, J. S. “Simple fabrication method of hierarchical nano-pillars using aluminum anodizing processes.” Current Applied Physics 9.2 (2009): e81-e85.
Young Ho Seo, and Young-Ho Cho. “Micro direct methanol fuel cells and their stacks using a polymer electrolyte sandwiched by multi-window microcolumn electrodes.” Sensors and Actuators A: Physical 150.1 (2009): 87-96.
Hong Gue Shin, Heon Young Kim, and Byeong Hee Kim. “Nano Molding Technology for Optical Storage Media with Large-Area Nano-Pattern.” Key Engineering Materials. Vol. 364. Trans Tech Publications, 2008.
Shin, H. G., Kwon, J. T., Seo, Y. H., & Kim, B. H. “Fabrication of Polymer Master for Antireflective Surface Using Hot Embossing and AAO Process.” International Journal of Modern Physics B 22.31n32 (2008): 5887-5894.
Kwang-Ho Kim, and Young-Ho Seo. “Ion-Based Micro Vibration Sensor for Ultra-High Frequency Vibration Detection.” Transactions of the Korean Society of Mechanical Engineers A 32.9 (2008): 728-732.
Hong Gue Shin, Jong Tae Kwon, Young Ho Seo, and Byeong Hee Kim. “Development of 3d micro–nano hybrid patterns using anodized aluminum and micro-indentation.” Thin Solid Films 516.18 (2008): 6438-6443.
Hong Gue Shin, Jong Tae Kwon, Young Ho Seo, and Byeong Hee Kim. “Development of 3d micro–nano hybrid patterns using anodized aluminum and micro-indentation.” Thin Solid Films 516.18 (2008): 6438-6443.
Young-Ho Seo, and Young-Ho Cho. “MEMS-based Direct Methanol Fuel Cells and Their Stacks for the Reduction of Cell-to-Cell Deviation and Interconnection Voltage Drop.” Transactions of the Korean Society of Mechanical Engineers A 31.10 (2007): 981-985.
Young-Ho Seo, and Doo-Sun Choi. “Development of the Nanofluidic Filter and Nanopore Micromixer Using Self-Assembly of Nano-Spheres and Surface Tension.” Transactions of the Korean Society of Mechanical Engineers A 31.9 (2007): 910-914.
Kim, W. K., Shin, H. G., Kim, B. H., & Kim, H. Y. “Straightening of micro wires using the direct wire heating and pulling method.” International Journal of Machine Tools and Manufacture 47.7-8 (2007): 1046-1052.
Young Ho Seo. “Nanomesh fluidic filter using self-assembly of colloidal nanospheres and surface tension.” Applied physics letters 90.12 (2007): 123514.
Kim, S. K., Yoo, Y. E., Seo, Y. H., Jae, T. J., Whang, K. H., & Choi, D. S. “Fabrication of Ni stamper based on micro-pyramid structures for high uniformity light guide panel (LGP).” Journal of the Korean Society for Precision Engineering 23.9 (2006): 174-178.
Seong Kon Kim, and Young Ho Seo. “Fabrication and characterization of the piezoelectric microtransformer based on microelectromechanical systems.” Applied physics letters 88.26 (2006): 263510.
Seo, Y. H., Choi, D. S., Lee, J. H., Je, T. J., & Whang, K. H. “Laterally driven thin film PZT actuator with high-aspect-ratio silicon beam for stroke amplification.” Sensors and Actuators A: Physical 127.2 (2006): 302-309.
Shin, H. G., Shin, Y. S., Kim, B. H., & Kim, H. Y. et al. “Burr control in meso-punching process.” Journal of mechanical science and technology 19.4 (2005): 968-975.
Seo, Y. H., Choi, D. S., Yoo, Y. E., Lee, J. H., Je, T. J., & Whang, K. H. et al. “Fabrication of 100-nm-scale nickel stamper based on chrome/quartz mask without anti-reflection layer.” Sensors and Materials 17.3 (2005): 155-165.
Yoo, Y. E., Seo, Y. H., Je, T. J., & Choi, D. S. “Injection Molding Technology for Micro/Nano pattern.” Journal of the Korean Society for Precision Engineering 22.2 (2005): 23-29.
Choi, D. S., Lee, J. H., Yoo, Y. E., Je, T. J., Whang, K. H., & Seo, Y. H. “Fabrication of Nanoscale Reusable Quartz Master for Nano Injection Molding Process.” Transactions of the Korean Society of Mechanical Engineers A 29.2 (2005): 228-231.
Seo, Y. H., Choi, D. S., Lee, J. H., Je, T. J., & Whang, K. H. “Fabrication of High Aspect Ratio 100nm-Scale Nickel Stamper Using E-Beam Writing based on Chrome/Quartz Mask Without Anti-Reflection Layer for Injection Molding of Optical Grating Patterns.” Transactions of the Korean Society of Mechanical Engineers A 28.11 (2004): 1794-1798.
Choi, D. S., Park, H. S., Seo, Y. H., Jae, T. J., & Whang, K. H. “Development and Characterization of Active Alignment System of Optical Fiber and Film Filter for Micro Optical Communication Module.” JOURNAL-KOREAN SOCIETY OF PRECISION ENGINEERING 21.9 (2004): 111-118.
Seo, Y. H., Kim, S. A., Cho, Y. H., Kim, G. H., & Bu, J. U. “On-Chip Process and Characterization of the Hermetic MEMS Packaging Using a Closed AuSn Solder-Loop.” Transactions of the Korean Society of Mechanical Engineers A 28.4 (2004): 435-442.
Ki-Bang Lee, Young-Ho Seo, and Young-Ho Cho. “Tuning of a Laterally Driven Microresonator using Electrostatic Comb Step Array.” Transactions of the Korean Society of Mechanical Engineers A 27.8 (2003): 1259-1265.
Young-Ho Seo, Ki-Ho Han, and Young-Ho Cho. “A Magnetic Microsensor based on the Hall Effect in an AC Microplasma.” Transactions of the Korean Society of Mechanical Engineers A 27.8 (2003): 1266-1272.
Young Ho Seo, Ki-Ho Han, and Young-Ho Cho. “New plasma Hall effect magnetic sensors: macrosensors versus microsensors.” Sensors and Actuators A: Physical 92.1-3 (2001): 123-131.
Young-Ho Seo, and Young-Ho Cho. “Design, Fabrication, Static Test and Uncertainty Analysis of a Resonant Microaccelerometer Using Laterally-driven Electrostatic Microactuator.” Transactions of the Korean Society of Mechanical Engineers A 25.3 (2001): 520-528.
Domestic Journal
강유수, 장웅기, 서영호, & 김병희. “전기장 시뮬레이션을 이용한 대면적 알루미늄 양극산화 공정.” 한국생산제조학회지 26.6 (2017): 599-604.
민덕호, 정민재, 김형진, 서영호, & 김병희. “적외선 센서를 이용한 곡면에서의 거리 측정.” 산업기술연구 37 (2017): 27-31.
최승원, 김형진, 장웅기, 서영호, & 김병희. “알루미늄 와이어 양극산화를 통한 튜브형 나노매쉬 제작.” 한국정밀공학회지 34.7 (2017): 501-505.
류인곤, 한의돈, 김병희, & 서영호. “다양한 양극산화 공정조건에 따른 롤 금형 표면에 형성되는 나노포어 형상에 대한 연구.” 한국생산제조학회지 26.2 (2017): 166-171.
이용훈, 한의돈, 김병희, & 서영호. “다공성 알루미나 필터 표면에 형성된 나노구조물의 형상에 따른 찢어짐에 의한 세포파쇄 특성 평가.” 한국생산제조학회지 26.1 (2017): 1-5.
김형진, and 서영호. “마이크로-나노구조물을 이용한 생체 물질 검출 플랫폼.” 고분자 과학과 기술 26.2 (2015): 126-139.
박인겸, 서영호, and 김병희. “풍력발전기 블레이드 변형 측정을 위한 액체금속 스트레인게이지 개발.” 한국정밀공학회지 32.3 (2015): 307-314.
변강일, 한의돈, 김병희, & 서영호. “미세유체시스템의 유체이송을 위한 탄성체의 복원력을 이용한 흡입형 미세유체펌프.” 한국생산제조학회지 24.1 (2015): 81-86.
박용민, 서상현, 서영호, & 김병희. “나노템플레이트 표면처리를 통한 나노패턴이 형성된 PDMS 탄성 스탬프 몰드 제작.” 한국생산제조학회지 24.1 (2015): 38-42.
김한희, 전은채, 최대희, 장웅기, 박용민, 제태진, … & 서영호. “누름가공과 AAO 공정을 이용한 나노-마이크로 복합패턴 제작방법 연구.” 한국정밀공학회지 32.1 (2015): 63-68.
변강일, 김형진, 김병희, & 서영호. “나선형 미세채널 내부에 형성되는 딘와류 이용한 미세입자 분리소자.” 한국생산제조학회지 23.6 (2014): 555-560.
장웅기, 전은채, 최두선, 김병희, & 서영호. “비이온계 계면활성제기반 고순도 알루미늄 습식식각을통한 균일한 마이크로패턴 어레이 제작.” 한국기계가공학회지 13.4 (2014): 13-20.
박인겸, 김형진, 홍남표, 서영호, & 김병희. “캔드타입 전동워터펌프용 수중베어링의 특성분석.” 한국생산제조학회지 23.2 (2014): 186-193.
박용민, 방현철, 서영호, & 김병희. “LED 광원의 눈부심 현상을 감소시키기 위한 표면 실장형 CR 렌즈 개발.” 한국생산제조학회지 23.1 (2014): 64-68.
한의돈, 장웅기, 고순탁, 곽호택, 서영호, & 김병희. “야구장 안전펜스 성능평가를 위한 충돌시험기 개발.” 한국생산제조학회지 22.6 (2013): 957-962.
장웅기, 김형진, 김병희, & 서영호. “탄성 블리스터 액츄에이터를 이용한 일회용 미세유체 주입펌프.” 한국생산제조학회지 22.2 (2013): 235-240.
박인겸, 서영호, and 김병희. “풍력발전기 블레이드 변형 측정을 위한 액체금속 스트레인게이지 개발.” 한국정밀공학회지 32.3 (2015): 307-314.
김형진, 장인배, 서영호, & 김병희. “바이오용 압전디스크방식 마이크로 펌프 설계 및 제작 (Ⅱ).” 한국생산제조학회지 21.3 (2012): 362-367.
김형진, 서영호, and 김병희. “바이오용 압전디스크방식 마이크로 펌프 설계 및 제작 (Ⅰ).” 한국생산제조학회지 21.3 (2012): 355-361.
김형진, 서영호, and 김병희. “모바일 연료전지용 초소형 수소 레귤레이터.” 한국생산제조학회지 20.2 (2011): 129-132.
김광호, 서영호, and 김병희. “튜브형 고분자전해질 연료전지와 일회용 수소발생소자를 결합한 미세유체소자용 전원공급소자.” 대한기계학회 논문집 A 권 34.7 (2010): 829-835.
신홍규, 박용민, 서영호, & 김병희. “양극산화공정을 이용한 반사방지 성형용 나노 마스터 개발.” 한국생산제조학회지 18.6 (2009): 697-701.
한정원, 최준혁, 유영은, 김병희, 이재숙, & 강신일. “나노 복제 기술을 이용한 나노 패턴의 제작 및 응용 기술.” 한국정밀공학회지 26.6 (2009): 30-35.
최종필, 이광호, 이해진, 이낙규, 김성욱, 주은덕, & 김병희. “마이크로 펀칭시스템 구현을 위한 심벌변위확대기구의 설계.” 한국생산제조학회지 18.1 (2009): 36-41.
김광호, and 서영호. “초고주파수 진동 감지를 위한 이온 질량기반 진동센서.” 대한기계학회 논문집 A 권 32.9 (2008): 728-732.
김광수, 최종필, 정창렬, 장재혁, 전병희, & 김병희. “모바일용 연료전지의 성능해석에 관한 연구.” 한국정밀공학회지 25.1 (2008): 115-121.
신홍규, 권종태, 홍남표, 서영호, & 김병희. “펠티어 소자를 이용한 나노 사출 금형의 능동형 온도 제어.” 소성가공 17.5 (2008): 337-342.
권종태, 신홍규, 서영호, & 김병희. “양극산화된 알루미늄과 마이크로 인덴테이션을 이용한 3 차원 마이크로-나노 하이브리드 패턴 제작.” 대한기계학회 논문집 A 권 31.12 (2007): 1139-1143.
반준호, 신재구, 김병희, & 김헌영. “미세 핫엠보싱 공정에서 폴리머의 유동특성.” 한국정밀공학회지 22.8 (2005): 159-164.
신홍규, 김웅겸, 김병희, 이종길, & 정세채. “펨토초 레이저를 이용한 크롬 박막의 가공성 평가에 대한 연구.” 한국레이저가공학회 학술대회 논문집 (2005): 145-148.
엄철, 김병희, and 최영석. “자동 광 정렬시스템 및 최적 광 정렬알고리즘의 개발.” 한국정밀공학회지 21.4 (2004): 194-201.
신용승, 김병희, 김헌영, & 오수익. “박판 전단시의 버 형성에 관한 연구.” 한국정밀공학회지 19.9 (2002): 166-171.
Micro·Nano·Bio Systems Lab. 